All-Flo Air-Operated Double-Diaphragm Pumps | Kinequip
Operated Double-Diaphragm Pumps
Kinequip helps buyers match All-Flo AODD pumps to chemical, coatings, food and beverage, general industrial, mining, oil and gas, plating, and semiconductor duties without losing the thread in a giant catalog.
Why Buyers Start Here
Use the pump family that fits the fluid and the duty point, not the one that simply looks convenient in a catalog screenshot.
Why buyers care
Simple design
All-Flo’s air mechanism uses few moving parts, which helps keep the pump easy to understand and easier to service.
Why buyers care
Application flexibility
The manufacturer positions the line across metal and plastic builds with elastomer choices for a wide range of fluid-transfer work.
Why buyers care
Industrial reliability
All-Flo says the pumps are performance engineered, 100% factory tested, and built for tough service conditions.
Core All-Flo Families
These cards route into the current All-Flo family structure and a few practical Kinequip product paths rather than trying to rebuild the whole catalog on one page.
All-Flo family
Plastic AODD Pumps
Start here for chemical-compatible, corrosive-fluid, and general transfer questions when plastic construction is the better fit.
EXPLORE PLASTIC PUMPS →
All-Flo family
Metal AODD Pumps
Start here for industrial transfer work where metal construction is the safer starting point.
EXPLORE METAL PUMPS →
All-Flo family
FDA & Hygienic Pumps
Route food, beverage, and hygienic questions here when the build needs the right material and cleanability choices.
EXPLORE HYGIENIC PUMPS →
All-Flo family
MAX-PASS / Specialty Pumps
Start here for solids-handling or specialty transfer questions that need a more specific All-Flo configuration.
EXPLORE SPECIALTY PUMPS →
All-Flo family
Accessories / Service Components
Keep maintenance, replacement, and accessory requests moving by starting with the current internal part routes.
VIEW ACCESSORIES & PARTS →
Find an All-Flo Pump for Your Application
Every application card keeps material, elastomer, suction, and duty-point selection in view. That is where most bad pump picks start.
Chemical transfer
Start with material compatibility, diaphragm selection, and the specific fluid before choosing a pump.
Paints and coatings
Use the build that matches the coating chemistry and the operating pressure instead of assuming one pump fits every coating.
Food and beverage
Match the construction and elastomer set to the sanitary requirement, then confirm the exact configuration with Kinequip.
General industrial
Use the current collection when the service is routine fluid transfer and the exact family still needs to be narrowed.
Lubrication and machinery
Confirm viscosity, temperature, and duty cycle before deciding whether a metal or plastic pump is the better starting point.
Mining and dewatering
Solid content and suction conditions matter here; MAX-PASS or another specialty family may be the right place to start.
Oil and gas
Choose the material and elastomer set around the actual media, temperature, and operating environment.
Plating and metal finishing
Use a configuration that matches the chemistry and corrosion exposure, then confirm the build with Kinequip.
Semiconductor and bulk transfer
Start with the fluid, cleanliness requirement, and port size; the right build depends on the actual service.
Find the Right All-Flo Pump Faster
Kinequip uses the fluid, the operating conditions, and any known part number to narrow the pump family before the quote step.
Selection
01 – Define the fluid
Identify the media, viscosity, temperature, chemical compatibility, and solids content before picking a pump family.
Selection
02 – Define the operating requirements
Confirm the flow, discharge pressure, suction conditions, port size, construction material, and operating environment.
Selection
03 – Confirm the pump
Kinequip helps match the All-Flo family and configuration, then turns the selection into a quote request or product-path handoff.
Shop All-Flo Products at Kinequip
The current All-Flo catalog still lives in the product layer. The landing page should help visitors choose where to go next, not duplicate the catalog itself.
Current product
All-Flo A050-NA3-GG3N-000 1/2″ Diaphragm Pump
A compact current product example for smaller transfer duties.
VIEW PRODUCT →
Current product
All-Flo BK-10E 1″ Diaphragm Pump
A current 1-inch example already represented in Kinequip’s All-Flo catalog.
VIEW PRODUCT →
Current product
All-Flo A200-EA3-TT3T-000 2″ Diaphragm Pump
Use this as a larger current transfer example when the duty point calls for a 2-inch starting point.
VIEW PRODUCT →
Current product
All-Flo P300-DHH-EEHE-000 3″ Diaphragm Pump
A 3-inch current product example for larger transfer needs.
VIEW PRODUCT →
Current product
All-Flo replacement part path
Use the current internal service route when the request is for an installed pump rather than a new selection.
VIEW PARTS →
Technical Resources
Official manufacturer documents are linked here so buyers can move from the landing page into the current PSG literature without hunting around.
Product overview brochure
A compact manufacturer overview for the full All-Flo line.
A100 plastic IOM
Installation and operation material for a current plastic pump family example.
A200 metal spec sheet
Use this when a metal AODD pump is the current selection path.
F200 FDA spec sheet
Useful for food, beverage, and hygienic selection review.
FAQ
Short answers for buyers, technicians, and search systems.
What is an All-Flo AODD pump?
All-Flo makes air-operated double-diaphragm pumps for industrial fluid transfer. The current manufacturer site describes the pumps as simple solutions for challenging applications.
What pump families does All-Flo make?
All-Flo currently organizes its offering around plastic pumps, metal pumps, FDA and hygienic pumps, specialty MAX-PASS pumps, and accessories.
Does All-Flo offer plastic and metal pumps?
Yes. The current All-Flo product pages include both plastic and metal AODD pump families.
Are All-Flo pumps available for food and beverage applications?
Yes. All-Flo’s FDA and hygienic pages and market pages show food and beverage coverage, with material and elastomer choices used to match the application.
Can All-Flo handle solids?
All-Flo’s MAX-PASS specialty family is positioned for process applications containing solids. The correct pump, diaphragm, elastomer, and operating conditions still need to be matched to the service.
What should I send Kinequip for an All-Flo quote?
Send the fluid, viscosity, temperature, solids content if applicable, flow requirement, pressure, suction condition, port size, construction material, and any known model or part number.
Need Help Selecting an All-Flo Pump?
Tell Kinequip what you are moving, required flow and pressure, available air supply, material compatibility requirements, and any known All-Flo model or part number.
Revision 1 · 2026-09-02